UPS

An elevator or lift UPS falls under the category of offline UPS and consists of three main parts which are a charger, batteries and an inverter. A lift UPS takes three-phase supply and powers the elevator while charging the batteries at the same time. This electronic device can be better described as an effective power backup solution for elevators.

An elevator UPS is manufactured by taking several important factors into consideration such as the duration of a common power cut, capacity of the lift motor, type of elevator, whether it would be used in a residential or commercial area, etc.

Features

  • Smart CPU Control
  • Support the lift in 7.5HP~47HP
  • Small, Light & Easy to install

Elevator UPS details

MODEL NV65AP-ARD-10 NV65AP-ARD-15 NV65AP-ARD-25 NV65AP-ARD-35 NV65AP-ARD-45 NV65AP-ARD-60
Capacity
7.5HP
11HP
22HP
35HP
39HP
47HP
AC Input
415V / 220VAC + 15%-20% Three Phase Input. 50/60Hz ± 10%
DC Voltage
48Vdc / 60Vdc / 72Vdc / 96Vdc / 120Vdc / 144Vdc / 180Vdc
Charger Type
Controlled Rectifier CVCC
Charging Time
10 Hours for 90% of Full Battery Capacity
Inverter Technology
IGBT based PWM Sine Wave
Inverter Output Voltage
400V / 415V / 200Vac Three Phase 50/60Hz ±0.1Hz
Inverter Efficiency
85%
Inverter Overload
105% continuous
Inverter Harmonic Distortion
<3% on Linear load
Inverter Crest Factor
4:1
Inverter Power Factor
0.8
Inverter Phase Displacement
120°±1°
Dimension (L×W×D)
530×400×195 mm
LCD Display
AC normal;Inverter normal; Battery low and overload
Protection
Output Overload and Short circuit & DC Under and Over Voltage