Read More

How to Choose the Right AGM Battery in UAE

Choosing the optimal Absorbent Glass Mat, or AGM battery in the UAE requires understanding your particular requirements, the local climatic conditions, and the technological aspects that differentiate AGM batteries from others. Here’s a guide to help you make an informed choice.

Understanding AGM Batteries

AGM batteries are sealed lead-acid batteries in which the electrolyte is absorbed in a fibreglass mat, making them spill-proof, maintenance-free, and highly resistant to vibration and extreme temperatures. Such characteristics make AGM batteries highly compatible with the UAE’s hot climate, where dusty weather and high heat have a tendency to weaken conventional batteries fast.

Key Considerations When Choosing an AGM Battery in UAE

Here are the key considerations to make when choosing an AGM battery in the UAE:

Application and Compatibility

  1. Compatibility: Look for whether your vehicle or application requires an AGM battery. New vehicles with start-stop technology, high-end infotainment, and safety features generally require greater power and reliability that AGM batteries provide.
  2. Other Applications: AGM batteries are well suited for solar backup systems, marine appliances, RVs, and UPS systems to keep lifts, computers and other electronics running during power outages because of their deep-cycle requirements and resistance to heat and vibration.

Climate Suitability

  1. Heat Resistance: The UAE’s extreme temperatures can shorten the lifespan of standard batteries. AGM batteries are built to withstand high heat, making them a superior choice for the region.
  2. Vibration Resistance: AGM batteries’ strong design and resistance to vibration ensure reliability and a long lifespan in high vibration environments like cars or lifts.

Capacity and Power Needs

  1. Ampere-Hour (Ah) Rating: Pick a battery with the appropriate capacity for your application. Higher Ah ratings offer longer duration power, which is necessary for cars with several electronic accessories or backup power supplies in lifts.
  2. Cold Cranking Amps (CCA): For automotive use, especially in vehicles with large engines or high electrical loads, select an AGM battery in UAE with a high CCA rating to ensure reliable starting power.

Durability and Maintenance

  1. Longevity: AGM batteries have a life twice as long as conventional flooded batteries, providing greater value for money in the long run at a higher initial cost.
  2. Maintenance-Free: They require no water top-ups and are sealed against acid spillage, reducing maintenance hassles and improving safety.

Price and Value

  1. Cost vs. Benefit: Although AGM batteries cost more than standard lead-acid batteries, their longer service life, lower maintenance requirements, and overall better performance usually make the extra cost worthwhile, particularly in the harsh UAE climate.
  2. Customised Deals: Many UAE suppliers offer tailored packages and installation services, so compare offers for the best value.

Selection Guide Steps

here is a step by step selection guide:

  1. Determine Your Application: Car, solar, marine, or back-up power? Choose the battery type and size appropriate for your application.
  2. Check Compatibility: Make sure the battery is compatible with your intended use or your system’s voltage and capacity needs.
  3. Check Climate Needs: Prioritise AGM batteries with proven heat and vibration resistance to UAE’s conditions.
  4. Compare Brands and Warranties: Opt for well-known brands and compare warranty conditions for extra peace of mind.
  5. Evaluate Price and Services: Consider the total value, including installation and after-sales support.

Why Our AGM Batteries Are the Smart Choice for Reliable Power Supply

Select our AGM batteries for unparalleled dependability, durable performance, and full peace of mind. Here at Alpha Power, our AGM VRLA batteries are sealed and maintenance-free, with no water refilling and trouble-free operation.

Designed for safety, they feature spill-proof and leak-proof technology, making them ideal for any environment. With deep cycle capability and a wide range of capacities (1.2Ah to 200Ah), our batteries deliver consistent power for solar systems, UPS, automotive, marine, and emergency backup applications. They have high efficiency, fast recharge rates, and a service life of 8 to 12 years, making our AGM batteries a smart, dependable investment.

Contact us to place an order today.

Read More

Why Fiber Optic Travelling Cable Is a Smarter Choice Compared to Copper Cables?

Fiber optic travelling cables are specialised data transmission mediums, mainly used for high speed data transfer. They use thin strands of glass or plastic fibers to transmit digital information over long distances. Copper cables, on the other hand, use copper conductors to transmit data using electrical signals.

Traditionally, copper cables have been used to transmit data and signals between the elevator car and the control room, but as the demand for a more reliable and future ready elevator system rises, fiber optic cables are becoming the highly sought after choice for building engineers. Today in this blog, we’ll explore why fiber optic travelling cables are a superior choice for data transmission over traditional copper cables and their various applications to help you understand which cable you should choose for your project.

Advantages of Fiber Optic Travelling Cables Over Copper Cables

Here are several factors that make fiber optic travelling cables a better choice than copper cables:

High Reliability

Fiber optic travelling cable can deliver uninterrupted data transmission even in an environment with high temperature, moisture exposure and electromagnetic interference where traditional copper cables tend to malfunction or degrade. As a result of this, fiber optics offer less service interruptions and seamless elevator operations that make them an ideal option for elevator shafts over copper cables.

High Data Transmission Speed

In copper cables data is transmitted through the movement of electrons, which means they transfer data at the speed of the electrons. On the other hand, in fiber optics, the data is transferred in the form of light, meaning that the speed of data transfer is approximately equal to the speed of light. This rapid data transfer in fiber optics allows for lightning fast communication between elevator systems and control panels. This feature supports real time monitoring and other advanced technologies used in modern elevators.

Low Attenuation

Signal attenuation refers to loss of signal strength over distance, which is a significant limitation with copper cables, which demand repeaters in every few kilometers. Fiber optic cables exhibit much lower attenuation in contrast. They maintain optimal signal quality over longer distances without frequent boosters. This advantage can be particularly beneficial in high rise buildings, where elevator shafts can span up to considerable heights.

Higher Bandwidth

Fiber optic cables offer bandwidth capacities exceeding 60 Tbps, far surpassing the 10 Tbps typically achievable with copper alternatives. This high bandwidth makes them ideal for supporting modern elevator features such as HD video surveillance, emergency communication systems and integrated building management solutions—all without lag or data bottlenecks.

Security Against Intrusion

Security is a top priority in building operations. Copper cables can be tapped relatively easily, which poses a risk of data theft or unauthorised access. Fiber optic cables, however, are extremely difficult to tap without detection. Thus, they offer a robust layer of security for sensitive elevator communications.

Non-Corrosive

Copper cables are prone to corrosion, especially in humid or corrosive environments, which can lead to failures and increased maintenance costs. Fiber optic cables, composed mainly of glass, are non-corrosive and maintain their integrity over time. As a result of their non-corrosive nature, they eliminate the need for frequent replacements.

Lightweight and Sturdy

Fiber optic travelling cables are significantly lighter and thinner than copper cables, which makes installing them easier and reduces the mechanical strain on elevator systems. Despite their lightweight nature, they are robust enough to withstand the constant flexing and movement required in elevator applications, and ensure a long service life.

Affordable Solution

While the upfront cost of fiber optic cables may be higher than copper, their longevity, minimal maintenance requirements and superior performance make them a cost-effective investment over the long term. Copper cables, on the other hand, might be cheaper, but they need frequent replacements and often malfunction, which increases the overall operational cost over time.

Futuristic Solution

As building technologies continue to evolve, the need for scalable, high-capacity data infrastructure becomes essential. Fiber optic travelling cables are future-proof, capable of supporting emerging smart elevator features and the high speed data demands of next-generation buildings. Upgrading copper cables to fiber optics now ensures that buildings can support technological advancements in years to come.

Applications

Fiber optic travelling cables are extensively used in elevator systems for transmitting control signals, real-time monitoring data, video feeds, and emergency communications between the elevator car and the control room. Their high reliability and bandwidth make them ideal for high-rise buildings, commercial complexes, hospitals, and smart buildings where seamless, secure, and high-speed data transmission is critical for safety and operational efficiency.

Conclusion

If you are in building construction or an engineer, looking for the right data transmission system for reliable elevator performance and future-proofing your projects, fiber optic travelling cables stand out as the superior choice over copper. Their unmatched reliability, speed, bandwidth, and security make them the ideal solution for modern elevator communication systems. However, make sure to buy from a reliable provider to ensure you are getting the best quality product and post-purchase support.

Trust Alpha Power for High Quality Elevator Travelling Cables

Here at Alpha Power, we offer high quality elevator travelling cables, including CAT6 and fiber optic options, engineered for maximum durability and flawless data transmission. Our cables come in drum lengths of 1000 or 500 metres, perfect for CCTV, control, and advanced lift applications, however, customised length options are also available. Contact us today for expert advice and reliable cable solutions tailored to your building’s needs.

Read More

Flexible Elevator Cable: Design, Features, Uses and Buying Guide

The rapidly expanding urban landscape of the UAE heavily depends on elevators as crucial components. They provide effortless vertical travel in skyscrapers, which makes them essential for running smart infrastructure networks. These elevator systems depend on flexible elevator cables for their reliable operation. Elevator cables are specifically designed by experts for establishing safe and efficient transmission without interruptions between the elevator car and the main control room. In this blog we will explore the design, features, uses of these elevator cables and understand how to select the right manufacturer for your project. So let’s get started…

What Is a Flexible Elevator Cable?

A flexible elevator cable is a purpose built cable used to connect the elevator car to the building’s controller and other systems. These cables are made to deliver a superior performance that standard cables cannot compete with. They have the capacity to withstand the rigors of daily operation of an elevator without breaking or bending. This makes them a trusted choice among engineers for power, control, and data transmission in modern elevators.

Design of Flexible Elevator Cable

Flexible elevator cables prioritize both mechanical flexibility and electrical performance. They contain a twisted pair of stranded plain annealed copper conductors and are reinforced with steel wire to support extended suspension.

They are highly preferred for use in elevators due to their slim profile and resistance to twisting during elevator operations.

Key Features of Flexible Elevator Cables:

Ultra Flexibility

The highly flexible design of these cables allows them to undergo repeated bending and movement without kinking or breaking. Flat cables, in particular, can handle millions of flex cycles and smaller bend radii than round cables.

Construction

These cables are constructed with stranded copper conductors, foam PE insulation, and ultra-flexible PVC or LSZH jackets. Some models include steel wires for added durability and support, especially in high-rise applications.

Flat vs. Round Design

Due to their flat design and reduced torque properties, flexible elevator cables resist twisting and corkscrewing and last longer despite multiple cycles.

Customization

Flexible elevator cables come in various specifications. They are available in two variations which include single and quad sections and their length can also be customized to fit different specifications.

Uses of Flexible Elevator Cables

Here are the uses of flexible elevator cables in the UAE:

  1. CCTV and Security Systems

Flexible elevator cables are used to connect IP cameras inside elevator cabins for real-time surveillance. Specialized cables with steel wire reinforcement provide reliable connection for transmitting video feeds due to their ability to deliver consistent performance during elevator operations.

  1. Power and Control Systems
    Flexible cables provide electrical connections for delivering power to elevator drive systems as well as powering cabin lighting and control panels.
  2. Data and Network Connectivity
    These cables transmit high-speed data for intercoms, digital displays, Wi-Fi, and IoT devices within elevators.
  3. Video Signal Transmission
    Flat elevator cables are ideal for transmitting video signals to digital signage or emergency communication screens, which are essential for communication in modern elevators.
  4. High-Rise and Smart Building Integration
    Flexible elevator cables in the UAE’s skyscrapers and smart cities are absolutely essential for ensuring continuous operation of fiber optic links alongside automated systems and AI-driven elevator management.

How to Find the Right Manufacturer for Flexible Elevator Cables?

To find the right manufacturer for flexible elevator cables in the UAE, keep in mind the following:

Brand Reputation

Choose manufacturers with a good market reputation and positive customer testimonials since they reflect consistent quality and reliability.

Compliance with Standards

Before choosing a manufacturer, make sure that the cables they offer adhere to ISO/IEC and TIA/EIA standards as these standards are there to ensure high-speed data transmission.

Material and Durability

Prioritize cables with stranded copper conductors, flexible PVC/LSZH jackets, and steel or aramid reinforcements as these materials allow the cable to withstand millions of flex cycles and harsh UAE conditions.

Cable Type

Select the appropriate cable type as per installation requirements. For example – if the travel length is under 60 meters, use Cat6 or Cat6A; for high bandwidth data transmission choose Cat6A or Cat7 lift cable; and for smaller distance use fiber optic cable.

Voltage Rating and Current Capacity

Verify if the manufacturer offers power cables with voltage rating of 300V or higher with appropriate conductor sizes. For connection with IP cameras and IoT devices, choose cables with PoE compatibility.

Shielding and Protection

Go for manufacturers that supply cables with STP/SFTP shielding to resist EMI/RFI interference, and oil/UV-resistant jackets for elevators in high-temperature areas. These features enhance cable longevity and signal integrity.

Cost-Effectiveness

Talk to the manufacturer regarding price per meter, minimum order quantities, and expected lifespan of the cable (should be at least over 1 million flex cycles). Compare upfront costs with long-term durability and safety to ensure value for your investment.

Consider these factors while choosing the manufacturer to ensure that you receive high quality and durable flexible elevator cable.

Conclusion

Flexible elevator cables are the backbone of modern elevator systems. They provide reliable power, control, and data connectivity in the UAE’s demanding high-rise and smart building environments. By understanding their design, features, and uses-and knowing what to look for in a manufacturer – you can ensure safe, efficient, and future-ready elevator installations.

Ready to upgrade your elevator systems? Contact us at Alpha Power today for premium, customized flexible elevator cables engineered for the UAE’s most ambitious projects.

Read More

Top Benefits of Using High Quality Flat Elevator Traveling Cable

High-rise buildings are very common throughout the UAE and elevators are a must for their basic operation. Elevator traveling cables serve as the primary components for efficient and secure operations of elevators. They provide continuous connection between controller units and elevator cars and facilitate smooth communication and power delivery. In this blog, we will explore the multiple advantages of installing premium quality flat elevator cables and their applications, but before that let’s take a look at what these cables are and their design & features.

What Is an Elevator Traveling Cable?

An elevator traveling cable is a specialized cable that connects an elevator car to its control system. It transmits signal and data between the car and the controller which is essential for its smooth operation. These cables are built to endure constant motion and can handle millions of flex cycles over their lifespan.

Design of Elevator Cables

High quality elevator traveling cables have the follow design characteristics:

Flat Cable Design: The cables have a flat design that offers improved operational performance while providing better control when compared to traditional rounded cables. The flat cable design offers resistance to twisting when elevators are in operation.

Conductors: Their core consists of stranded plain annealed copper conductors.
Insulation: They are insulated using high-quality PVC material.
Reinforcement: They are reinforced with high quality steel wire, which makes them highly durable.

Flat Traveling Elevator Cable Features:

● These cables are highly durability and can sustain millions of flex cycles
● Their lightweight construction with insulated design features allow easy installation
● These elevators traveling cable have fire-resistant characteristics which lower smoke emissions during dangerous situations
● They are available in customized size & packaging options to meet various project requirements

Benefits of Using High Quality Flat Elevator Traveling Cables

Using a good quality elevator traveling cable offer multiple benefits, such as:

Compact Solution

Flat elevator traveling cables are thinner and more compact than traditional round cables. These cables work perfectly for modern elevator designs that have minimal space for wiring. This practical design supports hidden circuitry in sophisticated systems such as those used in modern smart elevators.

Minimum Space Occupancy

Flat cables occupy about half the space of round cables due to their shape. This makes them ideal for high-density electronics packaging within elevator systems, where every millimeter counts.

Flexibility

Flat cables have a smaller bend radius compared to the round ones. Their parallel conductor arrangement prevents kinking or “corkscrewing,” and allows them to endure up to 15 million flex cycles without failure. This flexibility makes them perfect for high-motion applications like elevators.

Consistent Electrical Properties

The consistent geometry of flat cables ensures uniform electrical characteristics throughout such as impedance and capacitance. This reduces crosstalk and signal attenuation and ensures reliable communication between the elevator car and control system.

Decreased Weight

Flat cables eliminate unnecessary insulation and fillers, reducing their weight significantly. This lightweight design enhances energy efficiency by lowering the load on the elevator system.

No Overheating

The higher surface to volume ratio of flat elevator traveling cables allows better heat dissipation. This enables them to carry signals to and from the elevator car without overheating.

No Delay in Signal Transmission

Flat cables maintain consistent conductor spacing and dielectric properties, which reduce signal delays. This ensures faster communication between the control panel and elevator car—critical for smart elevators with advanced features like IoT integration.

Applications of Elevator Traveling Cables

Elevator traveling cables offer a practical solution for various elevator systems like:

Passenger Elevators

They are used in residential and commercial buildings for passenger elevators and offer efficient data transmission and seamless communication between floors.

Freight Elevators

Designed for industrial facilities or malls, freight elevators use robust elevator traveling cables as they can withstand heavy loads and frequent usage without compromising performance.

Smart Elevator Systems

They are also used in modern smart elevators that require advanced solutions for supporting IoT devices, real-time monitoring systems and security cameras.

Observation Elevators

For iconic glass observation elevators in skyscrapers, flat traveling cables are a must since they combine functionality with aesthetics while offering resistance against environmental factors like UV radiation or moisture.

Emergency Elevators

Emergency elevators depend on traveling cables due to their fire resistant nature which allow them to operate under extreme conditions during power outages or evacuation scenarios.

High-Speed Elevators

They are also used in the tallest of skyscrapers in the UAE that require specialized traveling cables that can handle vibrations and minimize energy loss efficiently.

Conclusion

High-quality flat elevator traveling cables play an essential role in supporting modern building infrastructure in the UAE. Their superior design ensures durability, flexibility, safety, and efficiency—making them an ideal choice for all types of elevators. Whether you’re managing a residential building or developing a modern skyscraper, investing in premium elevator traveling cables is a decision that guarantees long-term reliability and performance.

Choose Alpha Power for High Quality Elevator Traveling Cables in the UAE

If you are looking for High quality flat elevator cables, you can find them with us here at Alpha Power. We manufacture high quality elevator traveling cables for seamless CCTV connectivity in elevators. Our cables feature twisted pair construction with stranded copper conductors and steel wire reinforcement that ensure reliable performance even in high-movement environments. Here you can find flat elevator cables at standard drum lengths of 500 to 1000 meters but we can also customize the length for high-rise buildings. To learn more about our elevator cables or to get a quote, contact us today!

Read More

Benefits of Using Elevator Protection Pads

Elevator protection pads are must-have accessories that offer many advantages for residential and commercial buildings. They act as a protective shield for elevators’ interiors, protecting them from damage during regular use, moving operations, and renovation. They also play a major role in maintaining the aesthetic appearance of elevators. Today, in this blog, we are going to discuss about the advantages of using these pads. Stick till the end to discover the best protection pad for elevators in the UAE.

Six Advantages of Using Elevator Protection Pads

Using elevator protection pads offers many benefits; some of them are mentioned below:

Damage Prevention

One of the most important advantages of using elevator protection pads is that they can prevent damage to the elevator’s walls. Elevators are often used to move heavy items, and such usage can result in scratches, dents, and other damages to the interior surface. Without these protective pads, the likelihood of expensive repairs increases. These pads provide cushioning, thus maintaining the structural integrity of the elevator and saving on maintenance expenses in the long run.

Noise Reduction

Elevator protection pads are also important for reducing noise. When heavy or metallic loads are moved inside an elevator, the impact noise can reverberate throughout the building, making it unpleasant for occupants and guests. These protection pads come with cushioning that will reduce much of this noise, creating a quiet ride. This can be especially valuable in residential buildings where noise levels can affect the quality of life for residents.

elevator floor protection


Safety Enhancement

Aside from securing the elevator itself, these pads increase safety for both cargo and passengers. Hard surfaces or pointed edges inside an elevator can be hazardous and cause injury, particularly if heavy items are being transported. By padding such surfaces with soft material, the chances of accidental collisions or slips are greatly minimised. In addition, protection pads in elevators with mirrored panels can shield against glass breakage, further reducing the chances of injuries. This makes them very useful for building managers looking to reduce risks of liability for accidents.

Aesthetic Appeal

The appearance of an elevator can greatly influence a building’s overall impression. An elevator with scratched or damaged walls may indicate poor maintenance and care, potentially driving away potential tenants and visitors. In contrast, elevators equipped with protection pads maintain a clean and well-kept appearance. This not only enhances the aesthetic value of the building but also reflects positively on property management. Using these pads can help ensure that elevators look new and inviting.

Cost-Effectiveness

Investing in elevator protection pads is a cost-effective strategy for building owners and managers. The initial cost of buying and installing these pads is usually less than repairing elevators. By proactively protecting elevators from damage, property managers can avoid frequent replacements or repairs that could disrupt service and incur additional costs.

Ease of Installation and Maintenance

Modern elevator protection pads are designed for easy installation and maintenance. Many of them come with adjustable clamps or hooks that allow for secure attachment to various types of elevators without requiring extensive modifications. Additionally, these pads are often made from durable materials that can withstand wear while being easy to clean. This simplicity ensures that building managers can maintain their elevators’ protective measures without much effort.

Elevator protection pads offer multiple benefits that enhance the functionality and appearance of elevators in both residential and commercial settings. They are an indispensable investment for any building manager seeking to uphold high standards of maintenance and safety within their property. By using these protective measures, property owners can ensure their elevators remain in excellent condition while providing a safe and pleasant experience for users.

Choose Elevator Protection Pads from Alpha Power for Durability and Safety

Here at Alpha Power, our elevator protection pads offer unmatched durability, comprehensive coverage and easy installation. They are crafted from high-quality materials to withstand heavy use and prevent scratches and dents. We can customise the size of these protection pads to ensure a perfect fit for any elevator.

Beyond standard protection, we also offer premium floor, ceiling wraps, and vinyl wrapping services, safeguarding every surface. Our offerings also include tailored solutions for handrail, door, and wall protection, ensuring complete elevator safety. Choose Alpha Power for reliable, custom-fit protection that extends the lifespan and maintains the aesthetic appeal of your elevators.

Visit us now to explore our elevator safety solutions.

A Commitment to Reduce Carbon Emissions

When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

Why it Might Be Time to Visit Wind Farm Self-Performance

But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

Read More

Helping Companies in Their Green Transition

When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

Why it Might Be Time to Visit Wind Farm Self-Performance

But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

From Niche to 100 GW Mainstream and Beyond

When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

Why it Might Be Time to Visit Wind Farm Self-Performance

But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

Brand Service Demands a Special Mindset

When you service all makes of turbine, all around the world, how do you make sure that safety standards are maintained at the highest level? It’s an important question – and when we talk to our customers about what’s most important to them competencies in renewable energy systems. IRecco’s extensive range of robust and reliable products backed by its cutting-edge R&D and more than two decades of expertise are designed to ensure optimum performance. Of course, it’s a given that all turbines live up to strict legislation, but that’s not really where the greatest safety challenge lies. If you look at the causes of incidents, more than 90% are caused by human behavior. That’s why we believe that keeping the highest safety record means creating a safety-first mindset.

The people I meet who service our turbines are special: They’re proud of what they do, and they take their jobs very seriously. It’s not an easy environment to work in. When you’ve experienced standing on the top of an 80m high turbine, swaying in the wind like a ship at sea, you really respect what they do. It takes a cool head and a lot of courage.

Why it Might Be Time to Visit Wind Farm Self-Performance

But not all the people who are attracted to this lifestyle – because that’s what it is – are not natural-born rule followers. And to secure a high safety level for all, we spend a lot of time developing watertight safety procedures and protocols which must become second nature for them. Because not following rules has serious consequences. Secondly, training is vital, both technical safety training, turbine specific training as well as Safety awareness training. Adding to this leadership needs to be strong and leaders perform safety walks to check first-hand what our engineers will encounter. Even our executive leadership takes part, and our CEO has climbed the ladder and walked the roof of a nacelle… so when they talk safety they can speak from experience.

“ There are no secrets to success. It is the result of preparation, hard work, and learning failure ” -Tina Retina

Our goal is to create the same service documentation for each and every turbine, in a standardized, user-friendly format. Our engineers already have enough to think about without having to navigate convoluted directions! With this global service manual, we’re able to give the same training round the world to make sure all our technicians stay safe. Performance and target-wise we don’t distinguish between brands and expect the same safety performance when servicing all makes of turbines. Because safety comes first. It’s that simple.

People & Protocols Keep Our Global Safety Standards High

Adding Business Value Through Certification

IRecco has received inquiries seeking clarification of job offers received in unsolicited fashion. These job offers appear to come from organisations falsely pretending to recruit on behalf, or by people…